Rivet
Products
(3 products)

Rivet

China Rivet Manufacturers - Oukailuo
A rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite to the head is called the tail. On installation, the rivet is placed in a punched or drilled hole, and the tail is upset, or bucked (i.e., deformed), so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place. In other words, pounding creates a new "head" on the other end by smashing the "tail" material flatter, resulting in a rivet that is roughly a dumbbell shape. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.
Because there is effectively a head on each end of an installed rivet, it can support tension loads. However, it is much more capable of supporting shear loads (loads perpendicular to the axis of the shaft).
Fastenings used in traditional wooden boat building, such as copper nails and clinch bolts, work on the same principle as the rivet but were in use long before the term rivet was introduced and, where they are remembered, are usually classified among nails and bolts respectively.
Total 3 Page 1 Records
1
Concact Us Now
Screw Manufacturers, Bolt Manufacturers, Nut Manufacturers - Oukailuo
No.26 Zhijiang Road, Lanjiang Street, Yuyao City, Zhejiang Province, China 315400
You can trust us
Ningbo OuKaiLuo Hardware Co., Ltd, established in 1999, has been a leading manufacturer and supplier of fasteners. Our main export market is North America, Europe, Oceania, Korea and so on.
Marketing Support by Globalsir